The volume in the floor is larger than it looks
A saturated cushion holds roughly a gallon of water for every 10 square feet of floor. An average bedroom is 10 to 15 gallons before the subfloor is counted.
Rooms and wet areas
Knippa, TX
Our crew extracts water from carpet and padding, treats wet areas, and determines whether the flooring can be safely restored.
Signs to look for
If you notice any of these problems, call us before water has more time to spread into nearby materials.
A saturated cushion holds roughly a gallon of water for every 10 square feet of floor. An average bedroom is 10 to 15 gallons before the subfloor is counted.
Cut pile carpet wicks water up and evaporates from the tips, so the surface reads dry. The weight underfoot is coming from the backing and the pad.
Carpet pulls water outward and upward at the perimeter. That line marks the distance the water traveled after it stopped moving on its own.
Wet carpet gets heavy and pulls free of the tack strip pins. Loose corners also mean the backing has stretched and will need attention later.
Seam tape is held with adhesive that softens when it stays wet. An open carpet seam is a repair, and a peaked one means the carpet is swelling against itself.
Latex adhesive between the face and the secondary backing breaks down as it stays wet. That texture is layers separating starting, and it does not reverse.
What happens
Our crew adjusts the work to which areas and materials are wet, the distance the water traveled, and what materials can be saved.
We examine the pile, the pad and the subfloor with a moisture meter before starting. The reading through to the deck decides the method, not how wet the surface feels.
A weighted extraction tool presses the carpet and cushion into the vacuum slot so water leaves the backing.
Floating means detaching one edge and pushing air between the carpet and the cushion. We select it over pad removal when the water was clean and the cushion is worth trying.
Water concentrates at the walls and under the tack strip line, where a big tool cannot sit flat.
We keep tools off open seams and support loose edges instead of dragging on them. Careless extraction is how a saveable carpet ends up needing a carpet stretch and a seam repair.
Air movers are placed to sweep the surface or the space under a floated carpet, and an Professional dehumidifier removes that moisture from the air.
Speak with our crew
Let us know how it started, where the water came from, and which areas are wet.
What to expect
Here is how we typically handle carpet extraction near Knippa, TX.
Say how much water is on the carpet, what it came from, and how many hours it has been there.
Your callWalking on soaked carpet drives water deeper into the pad and stresses the backing.
+5 minutesA technician meters the pile, the pad and the subfloor and checks the seams and the tack strip.
On arrivalThe truck mounted extractor pulls the standing volume out of the assembly first. Most of the water in the room leaves during this stage.
First hour on siteWeighted and self propelled tools work the room in overlapping slow passes, then the perimeter and closets get detailed.
Day 1If we float, an edge is detached and air is pushed between the carpet and the pad.
Day 1, eveningThe same points get read every visit and logged, including the subfloor under the assembly. Carpet is typically the first layer to reach target and the deck the last.
Day 2 to 3Understanding the cost
We walk you through the recommended cleanup plan and price before you approve the job. These examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Carpet and pad extraction, one to two rooms, pad left in place | National estimate for the extraction stage only. Drying equipment is billed separately per unit per day. | $350 to $1,000 |
| Carpet extraction priced by area, clean water | National estimate for the mechanical extraction stage on typical residential carpet and cushion. | $1 to $3 per square foot |
| Whole floor of wet carpet, three or more rooms | National estimate for extraction across a connected carpeted floor, before drying equipment and cleaning. Larger continuous areas price nearer the low end per room because setup is shared. | $700 to $2,500 |
| Drying equipment only, one carpeted room, three days | National estimate for the equipment line alone, based on typical air mover and dehumidifier day rates. | $300 to $700 |
| Hot water extraction cleaning after drying, per square foot | National estimate for cleaning and grooming the carpet once the assembly is verified dry. | $0.25 to $0.60 |
| Reattach and stretch a floated carpet, per square foot | National estimate covering laying the carpet back on the tack strip, stretching and minor seam repair. | $0.60 to $1.50 |
Square footage of wet carpet
We measure the wet area with a meter, which is frequently smaller than the room. Water spreads unevenly and stops where the pad stops taking it.
How saturated the pad is
A damp assembly takes a couple of passes. A pad holding standing water takes many slow passes and more equipment days.
Float versus pad removal
Floating keeps your carpet and pad in place and saves material cost. Pad removal adds tear out, disposal and new cushion, but frequently shortens the drying by a day.
Carpet construction
Cut pile releases water readily under a weighted tool. Berber, dense commercial glue down and jute backed goods each take more care and more time.
Access and furniture
Stairs, tight hallways and heavily furnished rooms slow the tool down. Moving and blocking contents is labor before extraction even starts.
Equipment days
Air movers run roughly $25 to $40 per unit per day and Professional dehumidifiers roughly $70 to $110 per unit per day.
Why timing matters
Water may keep moving into nearby materials even when the surface looks dry.
Latex adhesive holding the face to the secondary backing softens and lets go when it stays wet.
Older carpets and many rugs use jute backing, which shrinks hard as it dries. A shrunken carpet pulls away from the walls and cannot be stretched back out.
Seam tape adhesive fails after a day or two under water. What was a drying job becomes a drying job plus flooring repair.
As the assembly dries, water travels up through the fibers and carries old soil with it. Marks appear on a carpet that looked fine while it was wet.
Helpful service information
Begin with the short explanation. Open a card if you want a little more detail.
The slot has to seat flat so it seals against the secondary backing, because that is the layer holding the water.
Carpet extraction is decided at the vacuum slot. The slot has to seat flat so it seals against the secondary backing, because that is the layer holding the water.
One edge comes off the tack strip, then an air mover is aimed into the gap so dry air travels between the carpet and the pad.
Floating a carpet is the technique that saves both layers. One edge comes off the tack strip, then an air mover is aimed into the gap so dry air travels between the carpet and the pad.
The face yarn is tufted through a primary backing, then a secondary backing is bonded on with latex adhesive.
Carpet is built in layers, and water attacks the glue between them. The face yarn is tufted through a primary backing, then a secondary backing is bonded on with latex adhesive.
Help near you
Select your area below, or call (844) 782-0175 and describe how the water emergency started.
Common questions
Usually yes when the water was clean and we reach it within a day or two. Extraction, drying and cleaning bring most carpet back.
We detach one edge from the tack strip and blow air between the carpet and the pad. That dries both layers from the middle out.
Water cleanliness first, then how saturated the cushion is, then the value of the carpet. Clean water and a moderately wet pad favor floating.
The extraction itself is typically a few hours on one to two rooms. Drying the assembly commonly takes three days.
A shop vacuum handles surface water up to about an inch and never reaches the backing. Home machines lack the weight and vacuum to pull water from the pad.
Yes. Foot traffic drives water deeper into the cushion and stresses the backing and the seams. Stay off it until it has been extracted.
It is the face of the carpet separating from its secondary backing, because the latex adhesive between them failed.
Speak with our crew
Let us know how it started, where the water came from, and which areas are wet.
Areas we serve
Our crew serves homes, businesses, and managed properties throughout Knippa, TX and nearby communities.
View the area on Google Maps